Blackmer Products

Better Get Blackmer®

Blackmer® is the leading global provider of innovative, high-quality sliding vane, centrifugal, screw and regenerative turbine pump, and reciprocating gas compressor technologies for the safe transfer of liquids and gases.

View Our Products

Sliding Vane Pumps

View All

Blackmer Markets

Providing Innovative Product-Transfer Solutions for a Variety of Markets and Applications

Blackmer provides innovative product transfer solutions for many markets and applications, including in the chemical process, energy, transport, military & marine; general industrial, and oil & gas industries.

View Our Markets

General Industrial

View Market
j_BlkmrFrame-S-Pumpsilo Frame-S_w_c-frame_adapter J-Frame S Cut 600

Frame S Centrifugal Pumps

The System One® Frame S Centrifugal Pump is the heavy duty alternative to standard small frame pumps which can easily become overstressed when operated off the best efficiency point of its performance curve. The Frame S Centrifugal Pump provides mid-frame strength and reliability in small frame space. It can be installed in the same space, on the same baseplate, and with the same piping as conventional small frame pumps, and is available in four different sizes.

  • Heavy duty alternative to standard small frame pumps
  • Lowest L³/D4 stiffness ratio of any competitive size pump
  • Designed and built for the toughest applications

Features and Benefits

  • Mid-size frame strength and reliability in small frame space - heavy-duty alternative to standard small frame pumps
  • Four model sizes to fit a wide range of applications and size restrictions
  • Lowest L3/D4 stiffness ratio of any competitive size pump - 46 (1.9) Frame S
  • Meets ASME/ANSI dimensional specifications
  • Flow capacities to 450 gpm (102 m3/hr)
  • Equipped to accept a C-Frame (NEMA)/D-Flange (IEC) motor adaptor, providing
    alignment of motor and power end without special tools or excessive labor
  • Right or left side discharge is possible with optional special foot
  • Heavy-duty construction and low stiffness ratios on shafts
  • Prevents common vibration damage and improves seal life
  • Short shaft overhand reduces bearing load to extend bearing life
  • Oversized heavy duty bearings provide greater load capacity and extend bearing
    life
  • Frame S offers an optional bearing frame foot with overhung casing

Applications

  • Chemicals
  • Mining de-watering
  • Water/wastewater
  • Liquid terminals

Technical Data

  • Ductile iron, 316 stainless steel, CD4MCu, A-20 and Hastelloy® materials available
  • Metric and ASME (ANSI) models available
  • Max. temperature: 400° C (750° F)
  • Micrometer adjustment nuts simplify and ensure precise impeller setting

Performance Assurance

Five Year Power End Performance Assurance

Should any System One power end component fail within 5 years of the original installation, including bearings or shafts that have fractured, a free replacement component will be provided. This offer is limited to a claim for one of each component per power end.*

One Year Mechanical Seal Performance Assurance

Should any factory supplied and installed mechanical seal fail within one year after the sale of the pump and seal, a spare parts kit (with materials the same as the original seal) will be provided at no charge. Limit of one seal claim per application.*

*See current Blackmer System One Warranty form 001-002 for full product warranty detail including exclusions and limitations of liability.

 

Frame: S, A, LD, and M Pumps

Certifications

 

  • icon_cert-ex (1)
  • ANSI B73.1M Compliance
  • MIL-S-901D Gr. A &
    MIL-STD-167 Type 1


Downloads

Installation Operation Manuals (IOMs)

Frame S, Frame SD, Frame A / LD17, Vortex and Frame M
Frame S, Frame SD, Frame A / LD17, Vortex und Frame M
МОДЕЛЬ S, МОДЕЛЬ A / LD17, ВИХРЕВОЙ НАСОС ТИПА VORTEX и МОДЕЛЬ M

Parts Lists