Wilden Products

Durability, Reliability and Cost Savings

Not only are Wilden pumps the most cost-effective, reliable and energy-efficient solutions available, but our state-of-the-art air distribution systems (ADS) significantly increase positive displacement pump productivity by reducing air consumption and maintenance for the most energy-efficient AODD pump operation possible.

View Our Products

Chem-Fuse Savings Calculator

Personalized savings calculations for your operation

Instantly see your potential savings based on the pre-filled standard mean time between failure data for Chem-Fuse and Conventional Diaphragms.

Start Saving Now

Specialty Series

View All

Wilden Markets

Wilden® solves pumping challenges across the spectrum

Wilden® positive displacement air-operated double-diaphragm (AODD) pump solutions are leading the way in a host of industries and applications.

View Our Markets

Wilden Support

The Wilden World of Service and Support - Assistance Beyond Expectations

Wilden® is always ready to assist with technical support for Wilden AODD pumps, parts or accessories.

View Our Support Options

Chem-Fuse Savings Calculator

Personalized savings calculations for your operation

Instantly see your potential savings based on the pre-filled standard mean time between failure data for Chem-Fuse and Conventional Diaphragms.

Start Saving Now
PS15 HS Stainless Steel

76 mm (3") Saniflo Hygienic Series Clamped Metal Pump PS15

AIR INLET
  • 3/4" FNPT
LIQUID INLET
  • 76 mm (3")
LIQUID DISCHARGE
  • 76 mm (3")
CONNECTION TYPE
  • Tri-Clamp®
  • DIN
  • SMS
VALVE OPTIONS
  • Ball
  • Mushroom
  • Flap
MAX SUCTION LIFT CAPABILITY
  • Full-Stroke Integral Piston – 3.8 m (12.5') Dry, 9.0 m (29.5') Wet
  • PTFE Integral Piston – 3.3 m (10.8') Dry, 9.0 m (29.5') Wet
  • EZ-Install TPE – 3.1 m (10.2') Dry, 9.0 m (29.5') Wet
  • Full-Stroke PTFE – 4.0 m (13.1') Dry, 9.0 m (29.5') Wet
  • Rubber – 4.4 m (14.5') Dry, 9.0 m (29.5') Wet
MAX FLOW RATE
  • Full-Stroke Integral Piston – 802 lpm (212 gpm)
  • PTFE Integral Piston – 742 lpm (196 gpm)
  • EZ-Install TPE – 844 lpm (223 gpm)
  • Full-Stroke PTFE – 749 lpm (198 gpm)
  • Rubber – 844 lpm (223 gpm)
MAX PRESSURE
  • 8.6 bar (125 psi)
MAX DIAMETER SOLIDS
  • Ball - 19.1 mm (3/4")
  • Mushroom - 9.5 mm (3/8")
  • Flap - 60.3 mm (2-3/8")
DISPLACEMENT PER STROKE *
  • Full-Stroke Integral Piston – 2.5 L (0.65 gal)
  • PTFE Integral Piston – 1.9 L (0.51 gal)
  • EZ-Install TPE – 2.5 L (0.67 gal)
  • Full-Stroke PTFE – 2.3 L (0.62 gal)
  • Rubber – 2.7 L (0.72 gal)
  • * 1 cycle = 2 strokes
Order Online
  • EC-1935-LOGO
  • usp-logo
  • 3a_logo
  • fda_logo
  • ce_logo
  • atex_logo

Features and Benefits

Saniflo™ Hygienic™ Series (HS) pumps are uniquely designed for high-cleanliness requirements and feature a free-draining flow path that enables clean-in-place (CIP) capability. The HS flow-through liquid-path design also eliminates any potential areas where product residue can be trapped and contaminate the product. They are perfect for low-acid, pasteurized and protein-based products all the way up to biopharmaceutical sterile processes. HS pumps also meet the highest standards and requirements in the industry, including 3A, ATEX, EC 1935/2004, USP Class VI* and FDA CFR 21.177.

*USP Class VI certification is available only for Saniflo HS pumps with PTFE elastomer options
  • Featuring energy efficient Pro-Flo® SHIFT ADS
  • Free-draining flow path for CIP capability
  • Easy assembly with self-centering ball cages
  • Permanent or rotatable stand for cleaning
  • Multiple valve options: ball, mushroom, or flap for different application requirements
  • Shear sensitive
  • Greater flow - more gallons pumped per SCFM

Performance and Specifications

Dimensions

Dim-PS15-73mm3-PFSSHS-MP

Note: Dimensions vary by material and connection. For additional information, please refer to the PS15 Sanfilo HS EOM.

Flow Curve – Full-Stroke Integral Piston Diaphragm (Pure-Fuse)

Flo-PS15-73mm3-PFSSHS-MP

Note: Additional performance curves can be found in the PS15 Saniflo HS EOM.

AIR INLET
  • 3/4" FNPT
LIQUID INLET
  • 76 mm (3")
LIQUID DISCHARGE
  • 76 mm (3")
CONNECTION TYPE
  • Tri-Clamp®
  • DIN
  • SMS
MAX FLOW RATE
  • Full-Stroke Integral Piston – 802 lpm (212 gpm)
  • PTFE Integral Piston – 742 lpm (196 gpm)
  • EZ-Install TPE – 844 lpm (223 gpm)
  • Full-Stroke PTFE – 749 lpm (198 gpm)
  • Rubber – 844 lpm (223 gpm)
VALVE OPTIONS
  • Ball
  • Mushroom
  • Flap
MAX PRESSURE
  • 8.6 bar (125 psi)
MAX DIAMETER SOLIDS
  • Ball - 19.1 mm (3/4")
  • Mushroom - 9.5 mm (3/8")
  • Flap - 60.3 mm (2-3/8")
MAX SUCTION LIFT CAPABILITY
  • Full-Stroke Integral Piston – 3.8 m (12.5') Dry, 9.0 m (29.5') Wet
  • PTFE Integral Piston – 3.3 m (10.8') Dry, 9.0 m (29.5') Wet
  • EZ-Install TPE – 3.1 m (10.2') Dry, 9.0 m (29.5') Wet
  • Full-Stroke PTFE – 4.0 m (13.1') Dry, 9.0 m (29.5') Wet
  • Rubber – 4.4 m (14.5') Dry, 9.0 m (29.5') Wet
DISPLACEMENT PER STROKE *
  • Full-Stroke Integral Piston – 2.5 L (0.65 gal)
  • PTFE Integral Piston – 1.9 L (0.51 gal)
  • EZ-Install TPE – 2.5 L (0.67 gal)
  • Full-Stroke PTFE – 2.3 L (0.62 gal)
  • Rubber – 2.7 L (0.72 gal)
  • * 1 cycle = 2 strokes
WETTED HOUSINGS 
Material Ship Wt
316L Stainless Steel 98 kg (216 lb)
NON-WETTED HOUSINGS
Description Material
Center Section Stainless Steel or Nickel-Plated Aluminum
Air Valve Stainless Steel or Nickel-Plated Aluminum
Air Chamber Stainless Steel, Nickel-Plated Aluminum

Elastomer Options

Material Temperature Limits
EPDM -51°C to 138°C (-60°F to 280°F)
FKM -40°C to 177°C (-40°F to 350°F)
PTFE* 4°C to 104°C (40°F to 220°F)
Saniflex™ -29°C to 104°C (-20°F to 220°F)

* 4°C to 149°C (40°F to 300°F) - 13 mm (1/2") and 25 mm (1") models only