G Series Sealed Internal Gear Pumps are extremely reliable, durable and cost effective for challenging industrial applications involving both thin and viscous liquids. Find a G-Series Distributor.
The G Series pumps are offered in a variety of connection sizes, materials and flow rates. To simplify installation upgrades, G Series pumps are directly interchangeable with up to 95% of the internal gear pumps currently available on the market including Viking®, Gorman-Rupp® and Tuthill®. No changes needed to piping, driver, coupling, flow rates or baseplates.
EnviroGear Selection Tool
EnviroGear Select is the pump selection application for EnviroGear E Series and G Series Internal Gear Pumps. EnviroGear Select will find all the models that meet a specific set of application requirements or a user can jump directly to a particular model and view a pump’s capability. Select has a built in library of fluids and allows users to add their own fluid products. All selections can be saved under a project and sent to PSG Dover for quotation.
Feature & Benefits
- Interchangeable with other gear pump brands
- No Repiping necessary
- World-class manufacturing and distribution network ensures quality and fast delivery
- Available in cast iron, carbon steel and stainless steel construction
- Multiple seal options available
- Available port sizes 1-1/2" NPT to 6" ANSI Flanges
- Flow rates to 500 gpm (114 m3/hr )
- Viscosity to 431,000 cSt
- Pressures to 200 psig (13.8 bar)
- Temperatures to 343°C (650°F)
Pump Selection Performance Criteria:
|Nominal Pump Rating||Max Discharge Pressure||Nominal Pump Rating||Max Discharge Pressure||Nominal Pump Rating||Max Discharge Pressure|
|Cast Iron*||Carbon Steel**||Stainless Steel***|
(20 cSt and above)
(20 cSt and above)
(550 cSt and above)
* Max temperature: G1-2 through G1-69 models 343°C (650°F ), G1-82 through G1-222 to 260°C (500°F)
** Max temperature: G1-2 through G1-69 models to 343°C (650°F ), G1-82 through G1-222 to 260°C 500°F)
*** Max temperature: All models to 260°C (500°F )
Temperature: Pumps operating at temperatures greater than 107°C (225°F) require increased pump clearances. If you require temperatures greater than 107°C (225°F) please contact factory.
Viscosity: G Series pumps are capable of pumping viscosities up to 431,500 cSt.
G Series Downloads
|Product Information||Dimensional Drawings|
|G Series IOM||G1-2|
|G Series Flyer||G1-4|
|G Series Brochure||G1-24|
|G Series Cross Reference Guide||G1-32|
|India G-Series Flyer||G1-55|
How It Works
G Series Sealed Internal Gear Pumps are designed with only two moving parts and operate equally well in both directions while providing positive, non-pulsating flow. The pump casing revolves allowing for multiple inlet and outlet positioning. A single adjustment end-clearance and an enlarged bearing housing at the rear end of the pump provide easy drive-end access to the shaft seal and single-point end-clearance adjustment for ease of maintenance and adjustability. The G Series pump baseplate systems minimize deflection and vibration to maximize life of the pump, motor and gear reducer. In addition, their innovative design allows easy and accurate shaft alignment.
- Chemical processing
- Soaps and detergents
- Paints, coatings and adhesives
- Inks and pigments
- Rubbers and plastics
- Polyurethane foam
- Food and beverage
- Textile manufacturing
- Fire retardants
- Petroleum refining
- Petroleum distribution
- Oil and gas
- Lubricating grease and oil
- Roofing materials
- Hot oils
- Personal care products
- Hydraulic oils
- Heat-transfer fluids
- Pulp and paper
Viking® is a registered trademark of Viking Pump, a Unit of IDEX Corporation.